-
กล่องสิ้นสุดไฟเบอร์ออปติก
-
กล่องไฟเบอร์ออปติก Splitter
-
ไฟเบอร์ออปติก PLC Splitter
-
กล่องร่วมสายไฟเบอร์
-
สาย MTP MPO
-
เส้นใยไฟเบอร์ออปติก
-
สายไฟเบอร์ออปติก Patch Cord
-
อะแดปเตอร์ไฟเบอร์ออปติก
-
ตัวลดทอนไฟเบอร์ออปติก
-
ช่องเสียบติดตั้งภาคสนาม
-
เคเบิ้ลวางสาย FTTH
-
แผงไฟเบอร์ออปติก Patch
-
การต่อสายไฟเบอร์ออปติก
-
ชุดเครื่องมือไฟเบอร์
-
หน่วยเครือข่ายออปติคัล
-
ชุดติดตั้งสายไฟฟ้า
-
อันโตนิโอกล่องไฟเบอร์ออปติกดี คุณภาพดี แพ็คเกจดี บริการดี รอออเดอร์ใหม่ครับผม ขอบคุณ
-
ฉัตริกาขอบคุณสำหรับการจัดส่งที่รวดเร็วทุกครั้งด้วยคุณภาพเดียวกัน สนับสนุนฉันในราคาเสมอ ขอบคุณสำหรับการสนับสนุนพิเศษสำหรับเราทุกครั้ง ชอบบริษัทของคุณมาก เจอกันเร็ว ๆ นี้ที่ประเทศจีน
-
คาร์ล่า หลุยส์โซฟีที่รัก เวลาของคุณเสียงไพเราะมากและให้วิธีแก้ปัญหาอย่างเต็มที่และตอบกลับทันทีเสมอ และช่วยให้เรามีธุรกิจมากขึ้นเรื่อย ๆ ขอบคุณ
-
เบนจามินเฟอร์นันโดฉันพอใจมากกับคุณภาพของคุณและคุณมักจะทำการสั่งซื้อให้เสร็จตรงเวลา หวังว่าจะทำธุรกิจกับคุณมากขึ้นในอนาคต และตลาดของเรากำลังเพิ่มขึ้น มาทำงานกันต่อไป
-
อเลฮานโดร เอสสวัสดีเพื่อนของฉัน ดีใจที่ได้เริ่มทำงานกับคุณเป็นเวลา 8 ปี และในช่วงเวลานี้เราได้เปิดหลายสาขา ขอบคุณที่อุดหนุนกันเสมอมา แม้ว่าตลาดจะซบเซา แต่ปริมาณการขายของเราเพิ่มขึ้น รักทุกคน
Fiber Optic Splice Closure 48 Core
ติดต่อฉันเพื่อรับตัวอย่างและคูปองฟรี
WhatsApp:0086 18588475571
วีแชท: 0086 18588475571
สไกป์: sales10@aixton.com
หากคุณมีข้อสงสัย เราพร้อมให้ความช่วยเหลือทางออนไลน์ตลอด 24 ชั่วโมง
xshape | Dome | max capacity | 48cores bunchy fibers |
---|---|---|---|
cable port | 4round ports | cable diameter | Φ8mm~Φ16 mm |
material | PC | splice tray qty | max. 4pcs |
closure dimension | 288*178 mm | weight | 2.0 kgs |
carton qty | 10 pcs | carton size | 80*43*35 mm |
แสงสูง | fiber optic splice enclosure,fiber optic joint closure |
FTTH Mini Dome Fiber Optic Splice Closure, Mechanical Splice Closure 48 Core
Sell point:
- Mechanical sealing
- Cable port: 4round ports
- Size:288*178 mm
- splice tray: 4 x 12 Fibers
- Max capacity: 48cores
- Cable diameter: Φ8mm~Φ16 mm
- Matreial: PC
Application: aerial, underground, pipeline,hand hole, wall mount, pole mount.
Operation conditions:
- Temperatures: -40℃~+65℃
- Humidity: ≤95% (at 40℃)
- Air Pressure: 70kPa ~106kPa
Technical Specifications:
1.Seal performance: after the box is sealed, inflate to 100kPa inwards (inflation only apply to the
models with the air hole), and then soak it in the water of normal temperature, after 15 minutes
of steady observation, there is no bubble to overflow.
2. Insulation resistance: the insulation resistance between the metal work piece and the earth is
greater than 20kMΩ.
3. Pressurization: there is no breakdown or flash over under 15kVdc/1min between the metal work
piece and the earth.
4. The curvature radius of the fiber 40mm, without extra loss inside the splice tray.
5. It can bear the axial tensile strength no less than 1000N.
6. Lifetime: 25 years.
7. Other performances are all in accordance with the requirement of standard YD/T814-1998.
Dimension and capacity
Outside dimension (Height x Diameter) |
288mm×178mm |
Weight (excluding outside box) |
1800g—1910g |
Number of inlet/outlet ports |
4 pieces |
Diameter of fiber cable |
Φ8mm~Φ16 mm |
Capacity of FOSC |
Bunchy: 4-48 (cores) |
FOSC cover size |
Height x Diameter: 208mm x 132mm |
Fiber optic splice tray (FOST) capacity |
Bunchy:4,6,8,12,(cores) |
Fiber holding tray |
1pc |
Accessory list:
No. |
item |
Usage |
1 |
Heat shrinkable protective sleeve |
Protecting fiber splices |
2 |
Nylon tie |
Fixing fiber with protective coat |
3 |
Earthing wire |
Putting through between earthing devices |
4 |
Abrasive cloth |
Scratching fiber cables |
5 |
Labeling paper |
Labeling fibers |
6 |
Special wrench |
Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube |
7 |
Measuring paper |
To measure perimeter, of which its diameter is enlarged with seal tape |
8 |
Seal tape |
Enlarging diameter of fiber cable which fits in with gasket ring. |
9 |
Insulation tape |
Enlarging diameter of fiber cable for easy fixing |
10 |
Metal hoop |
For wall mounting and pole hugging |
11 |
Buffer tube
|
Hitched to fibers and fixed with FOST, managing buffer. |
12 |
Desiccant |
Put into FOSC before sealing for desiccating air |